MOLDED PLATINUM TEMPERATURE SENSOR
MODEL MPT
FEATURES
¨
Low
cost ¨
Water-tight
construction ¨
Easy
to use flexible design ¨
Temperature
range: -50~105°C ¨
Employs
standard Pt 100 or Pt 1000 DIN
platinum resistance temperature elements ¨
Direct
temperature measurement without need of any further assembly |
 |
MPT temperature sensor is made up of Pt 100W or Pt-1000W platinum resistance temperature detector and connection cable molded together in thermoplastic rubber insulation. The sensor can be used for direct temperature measurement in air or liquids. The connection cable can be connected to a temperature indicator for display of temperature. MPT sensor features small size, flexible vibration-proof design and completely waterproof construction. The sensor is available in either 2-wire or 4-wire designs with standard one meter long connecting cable. Extra cable is available upon request from customers. Optional stainless steel enclosures are available to protect the probe tip.
APPLICATIONS
MPT has numerous applications in various types of industries for contact type or immersion temperature measurement in air or liquids within the range of -50 to 105°C. It can be used in chemical industries for continuous immersion in corrosive liquids e.g., electrolytic processes and for temperature measurement of hot or frosted pipe-lines. It is hygienic for temperature measurement in food industry as it does not contaminate food products. It also finds applications for temperature measurement in automobile or other vibrating machinery. It can also be used as a sub-assembly for low temperature resistance temperature detector assemblies.
|
|
|
 |
|
Direct temperature measurement of hot liquids |
Temperature
measurement of frosted pipe-lines |
Long time dipping in corrosive liquids |
|
Sensing
element |
Single
RTD, 1 Pt 100W
at 0°C or 1 Pt 1000W at 0°C as per IEC 751 class B or class A*
(* class A available only for Pt 100 probes with 4-wire circuit) |
|
Type
of construction |
Sensor
and extension cable molded together as one hot vulcanized unit |
|
Temperature
range |
-50
~ 105°C |
| Cable data |
2
or 4 stranded copper wires 0.35 mm2 (22 AWG), each conductor
polypropylene insulated, overall thermoplastic elastomer insulation, outer diameter ~ 3.5mm |
|
Insulation
resistance |
100
MW with 100 Vd.c. |
|
Optional
stainless steel case |
SS
316 case (50 mm length X 6mm OD or 100mm length X 6mm OD) is available for
protection of the sensor tip |
|
Markings |
Markings
of accuracy report, manufacturing
date and tractability (available only for probes with SS case) |
ORDERING INFORMATION
 |
Standard MPT probe |
MPT probe with SS cap |
CALIBRATION REPORT
|
MPT probes with SS cap can be supplied with calibration report engraved on the ca. The calibration repor provides information on temperature reading at 0°C and calibration date. |
|
For further information please Email us at: sensor@datainfosys.net
