Liquid Leak Sensors/Level Sensors

Liquid Leak Sensor

The definite solution for detecting the liquid leakage…

Swiftly, accurately and even small drip of the leakage is detected.

Photo-electric Leak Sensor avoids complex the adjusting procedure for any of the specific kinds of liquids.
Reset process is also very simple and quick by several seconds.

It the most sophisticated Liquid Leak Sensor by its excellent experience and architecture with patented liquid detecting principal. 
The application of this versatile sensor has expanded to semiconductor, LCD and other many fields by the admitted high performance. 
Leak Sensor has the following four series of the types:

Standard Liquid Leak Sensor

• Patented Photo-electric detecting method
• Very easy setting and resetting
• No adjusting procedure for any liquid
• Wide range of application even corrosive liquid characteristics.

RS- 1000 Series 

 
 By optical detecting principle, most all kinds of liquid can be detected quickly. 
 No adjustment is required for the sensor, then very few risk for setting error  Versatile on performance, and low cost on its expense for both of human and  material.

RS- 3000 Series

 
 By optical detecting principle, most all kinds of liquid can be detected quickly. 
 No adjustment is required for the sensor, then very few risk for setting error  Versatile on performance, and low cost on its expense for both of human and  material.

Failsafe Design Liquid Leak Sensor

• Advanced model adding failsafe functions
• Electrical failure or short/cut circuit is self-alarmed

RS- 2000 Series 

For the advanced performance is added to Standard Liquid Leak Sensor, RS-2000 series has self-diagnostic function for alarming the electric failure or wiring error by short circuit or cut circuit, as realizing ‘Failsafe’ property to the system.

Buzzer Alarm Liquid Leak Sensor

• Optional function of the alarm buzzer is built-in
• The buzzer sound notices the exact point of leak
• Good application for large factory or equipment

RS- 3000BZ Series 

• RS-3000/RS-3500 FAP-BZ detects leak of almost every kind of liquid by optical-electrical method 
• Either standalone use, or interfaced with a Control Unit is available by choice for application to the same Detection Unit 
• The case material of Detection Unit is featured by PFA, resisting against corrosive liquids or atmosphere, and complete water-protected feature of sound loud hole is fabricated 

Liquid Level Sensor

The versatile liquid level sensor for the tubings…
By non-contact photo-electric method, free from contamination.

We also release the uniquely developed features of Liquid Level Sensor using for tubings, especially convenient to use as the level sensor. 
Non-contact detection method with the liquid brings contamination free property against the liquids, and wide application avoiding the corrosion or chemical damage risks.

TK-010 Series

TK-010/015N2 Series Sensor is an optical-electric device to detect the liquid in transparent or semi-transparent tubings, being installed at the outer wall of tubing. The installation job is very simple using the attached bracket and nuts, anywhere place you can fix the sensor to detect if the liquid exists, or not. Namely this versatile device can be used for liquid level sensor as shown at a left photo.
 

TK-020 Series

• For smaller tube application, such as 3mm to 6mm in diameter.
• The unit is consisting of Detection Unit and Controller.